The widespread application of new energy vehicles has driven the large-scale promotion and landing of photovoltaic car sheds. Jiaogu Group has launched JDSOLAR photovoltaic shed system solutions for various application scenarios.

The characteristics of JDSOLAR photovoltaic shed solution:

1. Reduce electricity pressure

Before the application of photovoltaic new energy, electricity was obtained through the power grid. With the shortage of coal and other energy sources, the pressure on electricity consumption in the power grid is increasing. With the application of photovoltaic power generation systems in parking sheds and other scenarios, it can greatly affect the voltage consumption of the power grid.

2. Can bring additional benefits

No matter what industry or unit uses the photovoltaic shed solution, it can bring additional benefits. The electricity generated by the photovoltaic power generation system can not only be used for internal electrical equipment, but also be sold through grid connection.

3. Conforming to the current concept of ecological environment development.

The use of JDSOLAR photovoltaic shed solution fully responds to the global call for environmental protection. Reduce carbon emissions and protect our living environment. JDSOLAR photovoltaic car shed is a combination of parking shed and photovoltaic power generation system. Nowadays, photovoltaic technology is becoming increasingly mature, and building photovoltaic power generation integrated buildings will bring us more convenience.

JDSOLAR Photovoltaic Car Shed Solution Application Scenarios:

1. Civil and commercial photovoltaic power plants: We provide complete sets of system equipment and arrange professional installation technicians to go to the site for installation or remote guidance.

2. Installation targets: individuals, businesses, public facilities, governments, and educational institutions, etc,

3. Installation location: roof, sunlight room, pavilion, fence, canopy, balcony, sunshade, parking lot, etc.

JDSOLAR Photovoltaic Car Shed+Charging Station Solution

The integrated charging station of photovoltaic car shed and charging pile can store electrical energy through photovoltaic power generation. The photovoltaic, energy storage, and charging facilities form a microgrid, which intelligently interacts with the public power grid according to demand, and can achieve two different operating modes: grid connected and off grid. Not only does it achieve clean energy power supply, but it can also alleviate the impact of high current charging on the regional power grid.

The energy storage system is the core of the integrated solution of photovoltaic car shed+charging pile. The energy storage system has both grid connected and off grid operation modes, and can achieve four operation functions: peak shaving control, frequency modulation control, reactive voltage control, and off grid emergency power supply.

System features:

1. Bidirectional current conversion, capable of accepting superior instructions for offline switching;

2. The system has multiple protective measures to ensure its normal and stable operation;

3. Equipped with a monitoring system and fully digital control, it can view the operating status of energy storage converters and photovoltaic inverters, and has diagnostic and reset functions, enabling unmanned and fully automated operation.

The types of JDSOLAR photovoltaic car sheds are divided into single parking spaces, double parking spaces, and multi parking spaces. Most of them are modular designs and can be used alone or in multiple combinations, making it easy to expand, ranging from a few parking spaces to hundreds of parking spaces, with strong flexibility.

1. JDSOLAR single column photovoltaic car shed

JDSOLAR ground single column photovoltaic car shed is a solution developed specifically for large commercial and public utility power plants, with waterproof adhesive strips for waterproofing and a charging pile system. It has the advantages of low-carbon, energy-saving, green environmental protection, and can be reused.

(1) Adopting a single column structure design, multiple angles can be adjusted based on prefabricated adjustment holes, saving a lot of space and providing greater convenience for parking.

(2) The exterior decoration is relatively beautiful and can freely and flexibly support various types of photovoltaic modules.

(3) Multiple customization of carbon steel or steel aluminum combination ensures the overall stability and strength of the system. Prefabrication is completed in the factory, and installation can be completed on-site with only fasteners fixed and spliced.

(4) There are few situations where installation is limited, and only one side excavation is required for construction.

2. JDSOLAR multi column photovoltaic car shed

JDSOLAR multi column car shed is suitable for the installation of small and medium-sized ground photovoltaic power plants. The product is entirely made of aluminum alloy structural materials, with high pre installation characteristics, strong wind and snow resistance, and can adjust the entire system in the front, back, left, right, and up and down directions, greatly reducing the requirements for installation accuracy.

(1) The column of the car shed is embedded into the longitudinal beam, which is more aesthetically pleasing. At the same time, increasing the longitudinal beam profile and reducing the length of the cement foundation can achieve non-interference in car door opening. Compared to the single column car shed, the overall structure is safer and more stable, with stronger wind resistance and greater space utilization.

(2) The card block and slot adopt a symmetrical design, which requires no directionality during installation to improve installation efficiency; Less installation of spare parts, highly pre installed in the factory, without the need for any on-site cutting or drilling, reducing the difficulty and time of on-site construction, greatly reducing project costs.

(3) By designing the secondary beam and lower lock components, the system has good waterproof characteristics and solves the problem of water leakage.

(4) There are two sets of designs for the multi pillar car shed: the old model and the new model. The old model adopts a dual V structure with small profiles and obvious cost advantages; The new model adopts a unilateral design, which is more beautiful and convenient for parking compared to the old model.

3. JDSOLAR BIPV waterproof photovoltaic car shed

JDSOLAR BIPV photovoltaic car shed adopts a pre installed waterproof ground photovoltaic support system, which has better waterproof performance and can protect vehicles while generating electricity. More prominent in the following functions:

(1) The crossbeam adopts dual tracks, with a wide track at the bottom and a BIPV symmetrical track at the upper level; Maibei Te's patented new structure waterproof features a triple waterproof protection of "one press, one buckle, and one lock", combined with a water guide channel, effectively solving the problem of water seepage, with excellent waterproof performance.

(2) Most of the brackets are pre installed in the factory, without the need for cutting or welding on site. The installation can be completed by tightening the bolts, which is fast and reduces project costs with less construction time; The overall maintenance cost is low and the service life is long.

(3) The appearance is beautiful, and the design of hidden cement pier columns not only saves space but also facilitates parking.

(4) Tailored solutions based on customer on-site needs, maximizing the utilization of land resources, and BIPV rooftop parking sheds can also be built if conditions permit.JDSOLAR custom photovoltaic car shed

In addition to the common types of car sheds available in the market, Jiaogu Group also provides customized services, with a team of professional engineers from Jiaogu Group customizing personalized solutions for you:

1. Simulation Design: In order to meet the different needs of customers, Jiaogu Group uses advanced simulation calculation software to conduct on-site simulation calculations during the initial stage of the project (including project longitude and latitude, ground clearance, shed size, etc.), and designs the optimal system layout and installation angle to seek the best solution for customers.

2. In addition, Jiaogu Group also provides standard parking space design solutions, and customers can purchase according to their needs; We can also provide strength calculations, parking/driving layout plans, and other services according to customer needs.